Instrument panel and accessories
Console - Synchromesh - Includes 3300 Series

Fig. 12-121 Console Mounting - Synchromesh

The console assembly is attached to three mounting brackets by six screws. Four screws are accessible inside the glove box and two screws are located at the rear of the trim panel on the top surface. (Fig. 12-121) To remove the console, remove shift lever knob, remove the six attaching screws and lift the console to disconnect the wiring connector.

Fig. 12-122 Console Assembly - Synchromesh

Fig. 12-123 Console Wiring and Mounting

TRIM PANEL (Fig. 12-122)

The trim panel is attached to console body by seven screws. Six of the attaching screws are accessible from the button side and can be removed after removing the console. One attaching screw is accessible inside the glove box.

TACHOMETER

Refer to Fig. 12-123 for removal and installation. For checking procedures, refer to TACHOMETER - JETAWAY CONSOLE.