Instrument panel and accessories
Ignition switch

Fig. 12-109 Disconnecting Ignition Switch

Removal

  1. Turn switch to ACCESSORY position.
  2. Insert a paper clip into the small hole in the front side of the switch and depress, the lock will then release.
  3. Remove the escutcheon using Tool J-6411.
  4. Drop the switch down behind the instrument panel to remove the wiring connector. (Fig. 12-109)

NOTE

If equipped with air conditioning, remove the center outlet and the upper outlet duct, slide the lower outlet duct rearward and pull wiring and switch through center outlet opening to disconnect the wiring connector.