All connections in the headlight switch are connected as a group by a multiple connector.

The brightness of the instrument panel lights is controlled through a variable resistor unit by turning the light switch knob right or left. Rotating the knob fully counterclockwise will cause the dome lamp to light.

Removal

1. Disconnect wiring from light switch.
2. Remove knob by first pulling knob out to the HEADLIGHT position, then depress the spring loaded button on switch body and pull knob out of switch assembly.
3. Remove escutcheon nut using Tool J-6411. (Fig. 12-108)
4. Remove headlight switch from rear of instrument panel.

To install, reverse removal procedure and check switch operation.